Description
BMW 35128WT Eeprom Emulator
No red tamper dot on cluster.
Supported models:
F chassis with 35128WT Eeprom.
G chassis VDO odometer with 35128WT Eeprom.
How to Use 35128WT Emulator.
1. Read data from original 35128WT eeprom.
2. Write back the saved data to the new emulator.
4. Read/write new value to the eeprom emulator
5. Solder the ribbon to the board, pin 1 to pin 1
Note:
This has only been tested using the Dashcoder
You will need to use a can filter also or do the BDC.
